Descripción
Features
- House up to 6 Meters
- 16-Gauge Type 304 Stainless Steel
- 14-Gauge Type 304 Stainless Steel
- 1/8 DIN Cutout(s) Pre-Cut
- Horizontal, Vertical, or No Cutouts
- NEMA 4, 4X, 12, and 13
- Cover Secured with Screwed Latches
- Hinged Door
- Meter Mounted in Cover
- Sub-Panels Available
- Mounting Holes Integral to Enclosure
- PDA1024-01 24 VDC Power Supply Available
- UL Listed, CSA Certified
- Light / Horn / Reset Switch Option
Overview
The PDA2600 series of stainless steel NEMA 4X enclosures for 1/8 DIN Digital Panel Meters provide a convenient way to mount up to six Precision Digital meters to walls and other vertical structures. Many of these enclosures also have room for additional devices like a red light / horn and a 24 VDC transmitter power supply. These enclosures come pre-cut with horizontal or vertical 1/8 DIN cutouts or they can be ordered with no cutouts. The meters are mounted in the door of the enclosure thus allowing for programming and operation of the meter. No additional mounting hardware other than screws is needed. The door is hinged and secured with latches. Enclosures, meters and accessories are ordered and packaged separately.
Wall Mounting
The PDA2600 enclosures include integral mounting flanges attached at the top and bottom of the enclosure that can be used to mount the enclosures to a wall.
Mounting flange for wall mounting
Cover Securing Method
The cover is secured in place with screwed latches.
Accessories
Sub-Panels
The PDP2603 & PDP2604 sub-panels provide a convenient way to mount additional items to the base of the enclosure. They can be drilled to accept screws for easy mounting of relays, contactors, securing wiring clips, or installing other internal devices. See chart below for compatibility.
Sub-Panel Specifications
Size:
PDP2603: 8.75″ × 6.88″
(222 mm × 175 mm)
PDP2604: 10.75″ × 10.88″
(273 mm × 276 mm)
Thickness: 14 gauge
Material: Stainless steel
Mounting hardware is included.
| Model | PDP2603 | PDP2604 |
| Horizontal Cutouts | ||
| PDA2601 | ||
| PDA2602 | ||
| PDA2603 | • | |
| PDA2603-1 | • | |
| PDA2603-2 | • | |
| PDA2604 | • | |
| PDA2604-1 | • | |
| PDA2604-1C | • | |
| PDA2604-2 | • | |
| PDA2604-2C | • | |
| PDA2604-3 | • | |
| PDA2604-3C | • | |
| PDA2605 | • | |
| PDA2606 | • | |
| Vertical Cutouts | ||
| PDA2601-V | ||
| PDA2602-V | ||
| PDA2603-V | • | |
| PDA2604-V | • | |
| PDA2605-V | • | |
| PDA2606-V | • | |
| PDA2622 | ||
| No Cutouts | ||
| PDA2603-B | • | |
| PDA2606-B | • | |
PDA1024-01 24 VDC Power Supply for DIN Rail
The PDA1024-01 is a DIN rail mounted 24 VDC, 1.5 A power supply.
Specifications
Output Voltage: 21.6 ~ 26.4 VDC; ±10% 1.5A rated current.
Dimensions: 3.07″ x 3.66″ x 2.20″
(78 mm x 93 mm x 56 mm) (W x H x D)
PDA-SSTAG Stainless Steel Tags
PDA-SSTAG is a laser etched stainless steel tag accessory for any of your Precision Digital meters. The tag features custom text for equipment identification, instruction, or whatever else is needed in your facility. Each tag comes with a stainless steel wire and lead seal for easy mounting wherever you need it.
PDX18DIN-FILLER 1/8 DIN Cutout Filler
The NEMA 4X 1/8 DIN cutout filler is used to cover up empty 1/8 DIN cutouts and maintain the NEMA 4X rating to the panel or enclosure. It consists of a generic bezel with a black faceplate, as well as mounting brackets, gasket, etc.
PDA2600 Series Enclosure with Light / Horn
Light / Horn Accessories
Precision Digital offers a Light / Horn that can be mounted to any PDA2600 Series enclosures by the user. This Light / Horn can be wired to flash or stay steady on and the horn is rated at 85 dB. The light and horn can be controlled independently of each other via separate relays on the meter such that the horn can be programmed to silence via a button mounted to the enclosure and the light can be programmed to stay on until the alarm clears.
The light / horn and reset button are all rated NEMA 4X or IP65. The following table illustrates a typical way the Light / Horn option can be wired and programmed for the ProVu meter:
| Relay # | Connected to | Typical reset method (user selectable) |
| 1 | Flashing Light(1) | Reset automatically after alarm clears |
| 2 | Horn | Silence with Reset Button at any time |
| 3 | User Device | As user desires |
| 4 | User Device | As user desires |
1. Light can be wired to flash or stay steady on
Note: The Light / Horn option is powered from the 200 mA transmitter power supply, so when that option is installed, the meter’s transmitter power is downgraded from 200 mA. See isolated Transmitter Power Supply specification on meter’s data sheet for details.
MOD-LRHB1
When this MOD is ordered, the enclosure comes pre-drilled with holes for Light / Horn and Reset Button to be installed by user. The Light / Horn hole is in the back left corner of the enclosure and the Reset button is centered on the front of the enclosure about an inch off the bottom of the door. If the user would prefer to mount these items in different locations, order the PDA-LRH and the PDA-BUTTON1R separately and drill holes and mount as desired.
Light / Horn Dimensions Units: Inches (mm)
