Descripción
Features
- House up to 2 Meters
- Plastic
- 1/8 DIN Cutout(s) Pre-Cut
- 1/2″ Conduit Hole on PDA2801 and PDA2811
- NEMA 4X (PDA2801 NEMA 4)
- Meter Mounted in Cover
- Cover Held in Place with Screws
- UL, C-UL Listed
- Mounting Holes Through Enclosure
- Light / Horn / Reset Switch Option
Overview
The PDA2800 series of economical small footprint plastic NEMA 4X enclosures provide a convenient way to mount one or two Precision Digital meters to walls and other vertical structures. The PDA2811 enclosure also has room for an optional red light / horn. These enclosures come pre-cut with horizontal 1/8 DIN cutouts or they can be ordered with no cutouts. The PDA2801 and PDA2811 are provided with a 1⁄2″ conduit hole in the base of the enclosure. The meters are mounted in the cover of the enclosure thus allowing for programming and operation of the meter. No additional mounting hardware other than screws is needed. The cover is secured with four screws. Optional pipe mounting kits are available for mounting the enclosures to 2″ pipes. Enclosures, meters and accessories are ordered and packaged separately.
Wall Mounting
The PDA2801 includes four screws that go through the back of the enclosure for quick and easy wall mounting. The PDA2811, PDA2812, and PDA2821 enclosures include four mounting flanges and four screws. Using the included screws and a phillips head screwdriver simply assemble each flange in the four threaded screw holes on the back of the enclosure as shown in the example below.
PDA2811 / PDA2812 enclosure with supplied mounting flanges installed
PDA2801 with screws through back of enclosure for wall mounting
Cover Securing Method
The cover is secured with four screws.
Accessories
PDA6845 2″ Pipe Mounting Kit
The PDA6845 and PDA6845-SS pipe mounting kits provide convenient ways to mount the PDA2801 enclosure to 2″ pipes.
PDA6545 2″ Pipe Mounting Kit
The PDA6545 and PDA6545-SS pipe mounting kits provide convenient ways to mount the PDA2811, and PDA2812 enclosures to 2″ pipes.
PDA2800 Series Enclosure with Light / Horn
Light / Horn Accessories
Precision Digital offers a Light / Horn that can be mounted to the PDA2811, PDA2812 or PDA2821 by the user. This Light / Horn can be wired to flash or stay steady on and the horn is rated at 85 dB. The light and horn can be controlled independently of each other via separate relays on the meter such that the horn can be programmed to silence via a button mounted to the enclosure and the light can be programmed to stay on until the alarm clears.
The light / horn and reset button are all rated NEMA 4X or IP65. The following table illustrates a typical way the Light / Horn option can be wired and programmed for the ProVu meter:
| Relay # | Connected to | Typical reset method (user selectable) |
| 1 | Flashing Light(1) | Reset automatically after alarm clears |
| 2 | Horn | Silence with Reset Button at any time |
| 3 | User Device | As user desires |
| 4 | User Device | As user desires |
1. Light can be wired to flash or stay steady on
Note: The Light / Horn option is powered from the 200 mA transmitter power supply, so when that option is installed, the meter’s transmitter power is downgraded from 200 mA. See isolated Transmitter Power Supply specification on meter’s data sheet for details.
MOD-LRHB1
When this MOD is ordered, the enclosure comes pre-drilled with holes for Light / Horn and Reset Button to be installed by user. The Light / Horn hole is in the back left corner of the enclosure and the Reset button is centered on the front of the enclosure about an inch off the bottom of the door. If the user would prefer to mount these items in different locations, order the PDA-LRH and the PDA-BUTTON1R separately and drill holes and mount as desired.
Light / Horn Dimensions Units: Inches (mm)
PDA-SSTAG Stainless Steel Tags
PDA-SSTAG is a laser etched stainless steel tag accessory for any of your Precision Digital meters. The tag features custom text for equipment identification, instruction, or whatever else is needed in your facility. Each tag comes with a stainless steel wire and lead seal for easy mounting wherever you need it.
PDX18DIN-FILLER 1/8 DIN Cutout Filler
The NEMA 4X 1/8 DIN cutout filler is used to cover up empty 1/8 DIN cutouts and maintain the NEMA 4X rating to the panel or enclosure. It consists of a generic bezel with a black faceplate, as well as mounting brackets, gasket, etc.
